Siemens SINAMICS G120D CU240D-2 DP Manual page 431

r8931[0...3] PN IP address actual / PN IP addr act
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0
Description: Displays the actual IP address for the onboard PROFINET interface on the Control Unit.
r8932[0...3] PN Default Gateway actual / PN Def Gateway act
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0
Description: Displays the actual default gateway for the onboard PROFINET interface on the Control Unit.
r8933[0...3] PN Subnet Mask actual / PN Subnet Mask act
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0
Description: Displays the actual subnet mask for the onboard PROFINET interface on the Control Unit.
r8934 PN DHCP Mode actual / PN DHCP Mode act
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0
Description: Displays the actual DHCP mode for the onboard PROFINET interface on the Control Unit.
Value: 0:
2:
3:
Notice: When the DHCP mode is active (parameter value not equal to 0), PROFINET communication via this interface is no
longer possible! However, the interface can be used for commissioning tool such as STARTER or SCOUT.
r8935[0...5] PN MAC address / PN MAC addr
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
0000 hex
Description: Displays the MAC address for the onboard PROFINET interface on the Control Unit.
r8939 PN DAP ID / PN DAP ID
CU240D-2_PN Access level: 3
CU240D-2_PN_F
Can be changed: -
CU250D-2_PN_F
Unit group: -
Min
-
Description: Displays the PROFINET Device Access Point ID (DAP ID) for the onboard PROFINET interface.
SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
DHCP off
DHCP on, identification using MAC address
DHCP on, identification via name of station
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
255
Calculated: -
Scaling: -
Unit selection: -
Max
3
Calculated: -
Scaling: -
Unit selection: -
Max
00FF hex
Calculated: -
Scaling: -
Unit selection: -
Max
-
2 Parameters
2.2 List of parameters
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Integer16
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned8
Dyn. index: -
Func. diagram: -
Factory setting
-
Data type: Unsigned32
Dyn. index: -
Func. diagram: -
Factory setting
-
431