Mitsubishi Electric GOT2000 Series Connection Manual page 1203

(2) When connecting the GOT and PLC in Ethernet communication
Step 1.
Click the Connection Destination view
the Navigation window of MT Setting/Monitoring tool for C Controller module.
Step 2.
The [Transfer Setup] is displayed.
Step 3.
Set the [Transfer Setup]:
PLC side I/F : GOT
Other station : No specification
Step 4.
Double-click [GOT] of the CPU side I/F to display [CPU side I/F Detailed Setting of GOT].
Step 5.
Mark the [via GOT(Ethernet) transparent mode] checkbox on the [CPU side I/F Detailed Setting of GOT]
screen.
Step 6.
By clicking [Set], the [GOT (Ethernet) Transparent Setting] is displayed.
Here, set the C Controller module (Q Series) (Q24DHCCPU-V), which is firstly connected via a GOT.
[Connection Destination]
22.7 Personal Computer Side Setting
[(Connection target data name)] in
22 - 147
22