Step 3.
Click [Communication] to set the followings.
[Connection Method]
[Method]: CRnQ_R
Step 4.
Click [Detail] to set the followings.
Check-mark [USB] in [Serial Port].
Step 5.
Click [Detail].
Select either of the following in [(2)PLC Side I/F Setting of PLC Module].
[via GOT(Bus) transparent mode]
[via GOT(direct coupled) transparent mode]
[via GOT(Ethernet) transparent mode]
Here, select [via GOT(Ethernet) transparent mode].
22.7 Personal Computer Side Setting
22
22 - 135