Atmf Recover Guest - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF RECOVER GUEST

atmf recover guest
Overview Use this command to initiate a guest node recovery or replacement by reloading
its backup file-set that is located within the AMF backup system. Note that this
command must be run on the edge node device that connects to the guest node.
atmf recover guest [<guest-port>]
Syntax
Mode User Exec/Privileged Exec
Example To recover a guest on node1 port1.0.1, use the following command
node1#
Related show atmf backup guest
Commands
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter Description
<guest-port>
The port number that connects to the guest node.
atmf recover guest port1.0.1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2084