Table of Contents
Advertisement
A
T
M
F
LLIED
ELESIS
ANAGEMENT
SHOW ATMF AREA
show atmf area
Overview
Use this command to display information about an AMF area. On AMF controllers,
this command displays all areas that the controller is aware of. On remote AMF
masters, this command displays the controller area and the remote local area. On
gateways, this command displays the controller area and remote master area.
show atmf area [detail] [<area-name>]
Syntax
Mode
Privileged Exec
Example 1
To show information about all areas, use the command:
controller-1#
The following figure shows example output from running this command on a
controller.
Table 5: Example output from the show atmf area command on a Controller.
controller-1#show atmf area
ATMF Area Information:
* = Local area
Area
Name
----------------------------------------------------------------------------
* NZ
Wellington
Canterbury
SiteA-AREA
Auckland
Southland
Area count:
The following figure shows example output from running this command on a
remote master.
C613-50103-01 REV A
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
Description
detail
Displays detailed information
<area-name>
Displays information about master and gateway nodes in the
specified area only.
show atmf area
Area
Local
ID
Gateway
1
Reachable
2
Reachable
3
Reachable
14
Unreachable
100
Reachable
120
Reachable
6
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Remote
Remote
Gateway
Master
N/A
N/A
Reachable
Auth OK
Reachable
Auth Error
Unreachable
Unreachable
Reachable
Auth Start
Reachable
Auth OK
Area node count:
Node
Count
3
120
-
-
-
54
177
2109
Advertisement
Table of Contents
