Table of Contents
Advertisement
D
H
C
YNAMIC
OST
ONFIGURATION
IP DHCP LEASEQUERY ENABLE
ip dhcp leasequery enable
Overview
Use this command to enable the DHCP server to respond to DHCPLEASEQUERY
packets. Enabling the DHCP leasequery feature allows a DHCP Relay Agent to
obtain IP address information directly from the DHCP server using
DHCPLEASEQUERY messages.
Use the no variant of this command to disable the support of DHCPLEASEQUERY
packets.
For more information, see the
ip dhcp leasequery enable
Syntax
no ip dhcp leasequery enable
Default
DHCP leasequery support is disabled by default.
Mode
Global Configuration
Examples
To enable DHCP leasequery support, use the commands:
awplus#
awplus(config)#
To disable DHCP leasequery support, use the commands:
awplus#
awplus(config)#
Related
show counter dhcp-server
Commands
show ip dhcp server statistics
show ip dhcp server summary
C613-50103-01 REV A
P
(DHCP) C
ROTOCOL
OMMANDS
configure terminal
ip dhcp leasequery enable
configure terminal
no ip dhcp leasequery enable
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
DHCP Feature Overview and Configuration
Guide.
2192
Advertisement
Table of Contents
