Ip Address Dhcp - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

D
H
C
YNAMIC
OST
ONFIGURATION

IP ADDRESS DHCP

ip address dhcp
Overview
This command activates the DHCP client on the interface you are configuring. This
allows the interface to use the DHCP client to obtain its IP configuration details
from a DHCP server on its connected network.
The client-id and hostname parameters are identifiers that you may want to set in
order to interoperate with your existing DHCP infrastructure. If neither option is
needed, then the DHCP server uses the MAC address field of the request to identify
the host.
The DHCP client supports the following IP configuration options:
The no variant of this command stops the interface from obtaining IP
configuration details from a DHCP server.
ip address dhcp [client-id <interface>] [hostname <hostname>]
Syntax
no ip address dhcp
Mode
Interface Configuration for a VLAN interface.
Examples
To set the interface vlan10 to use DHCP to obtain an IP address, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
P
(DHCP) C
ROTOCOL
OMMANDS
Option 1 - the subnet mask for your device.
Option 3 - a list of default routers.
Option 6 - a list of DNS servers. This list appends the DNS servers set on your
device with the
ip name-server
Option 15 - a domain name used to resolve host names. This option replaces
the domain name set with the
ignores this domain name if it has a domain list set using the
command.
Option 51 - lease expiration time.
Parameter
Description
<interface>
The name of the interface you are activating the DHCP client on. If
you specify this, then the MAC address associated with the
specified interface is sent to the DHCP server in the optional
identifier field.
Default: no default
<hostname>
The hostname for the DHCP client on this interface. Typically this
name is provided by the ISP.
Default: no default
configure terminal
interface vlan10
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
command.
ip domain-name
ip address dhcp
command. Your device
ip domain-list
2189

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents