Discovery Method - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT
SHOW ATMF LINKS GUEST
Output Figure 50-14: Example of output from show atmf links guest detail
Table 50-1: Parameters shown in the output of show atmf links guest
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Detailed Guest Link Information:

Interface
Class Name
Model Type

Discovery Method

IP Address
State
MAC address

Interface
Class Name
Model Type
Discovery Method
IP Address
State
MAC address
Device Type
Interface
Class Name
Model Type
Discovery Method
IP Address
State
MAC address
Parameter
Interface
Class Name
Model-Type
Discovery Method
IP Address
State
MAC Address
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
: port1.0.1
: -
: other
: Dynamic
: 192.168.1.2
: Getting ID
: 0013.1a1e.4589
: port1.0.2
: aastra-phone
: other
: Dynamic
: 192.168.1.3
: Full
: 0008.5d10.7635
: Aastra IP Phone
: port1.0.4
: panasonic-camera
: other
: Dynamic
: 192.168.1.5
: Getting ID
: 0800.239e.f1fe
Description
The port on the parent node that connects to the guest.
The name of the ATMF guest-class that has been assigned
to the guest node by the
The model type of the guest node, as entered by the
modeltype command. Can be one of the following:
• alliedware
• aw+
• tq
• other
The discovery method as applied by the
command. This can be either dynamic or static.
The IP address of the guest node.
The MAC address of the guest node.
atmf guest-class command.
discovery
2149