Dns-Server - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION
-
DNS SERVER

dns-server

Overview This command adds a Domain Name System (DNS) server to the DHCP address
pool you are configuring. You can use this command multiple times to create a list
of DNS name servers available to the client. This sets the DNS server details using
the pre-defined option 6.
The no variant of this command removes either the specified DNS server, or all DNS
servers from the DHCP pool.
dns-server <ip-address>
Syntax
no dns-server [<ip-address>]
Mode DHCP Configuration
Examples To add the DNS server with the assigned IP address 192.168.1.1 to the DHCP pool
named P1, use the following commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
To remove the DNS server with the assigned IP address 192.168.1.1 from the DHCP
pool named P1, use the following commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
To remove all DNS servers from the DHCP pool named P1, use the following
commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
Related default-router
Commands
show ip dhcp pool
subnet-mask
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
<ip-address>
configure terminal
ip dhcp pool P2
configure terminal
ip dhcp pool P2
configure terminal
ip dhcp pool P2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IPv4 address of the DNS server, in dotted decimal notation.
dns-server 192.168.1.1
no dns-server 192.168.1.1
no dns-server
2186