Ip Dhcp Option - Allied Telesis x310-26FT Command Reference Manual

X310 series stackable access switches for alliedware plus version 5.4.6-1.x
Table of Contents

Advertisement

D
H
C
YNAMIC
OST
ONFIGURATION

IP DHCP OPTION

ip dhcp option
Overview
This command creates a user-defined DHCP option. Options with the same
number as one of the pre-defined options override the standard option definition.
The pre-defined options use the option numbers 1, 3, 6, 15, and 51.
The no variant of this command removes either the specified user-defined option,
or removes all user-defined options. This also automatically removes the
user-defined options from the associated DHCP address pools.
ip dhcp option <1-254> [name <option-name>] [<option-type>]
Syntax
no ip dhcp option [<1-254>|<option-name>]
Mode
Global Configuration
Examples
To define a user-defined ASCII string option as option 66, without a name, use the
command:
awplus#
awplus(config)#
C613-50103-01 REV A
P
(DHCP) C
ROTOCOL
OMMANDS
Parameter
Description
<1-254>
The option number of the option. Options with the same number
as one of the standard options overrides the standard option
definition.
<option-name>
Option name used to identify the option. You cannot use a
number as the option name. Valid characters are any printable
character. If the name contains spaces then you must enclose it
in "quotation marks".
Default: no default
<option-type>
The option value. You must specify a value that is appropriate to
the option type:
asci
hex
ip
integer A number from 0 to 4294967295.
flag
configure terminal
ip dhcp option 66 ascii
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
An ASCII text string
A hexadecimal string. Valid characters are the
numbers 0–9 and letters a–f. Embedded spaces are
not valid. The string must be an even number of
characters, from 2 and 256 characters long.
An IPv4 address or mask that has the dotted decimal
A.B.C.D notation. To create a list of IP addresses, you
must add each IP address individually by using the
option command multiple times.
A value that either sets (to 1) or unsets (to 0) a flag:
true, on, or enabled will set the flag.
f alse, off or disabled will unset the flag.
2193

Advertisement

Table of Contents
loading

This manual is also suitable for:

X310-26fpX310-50fpX310-50ft

Table of Contents