Atmf Provision Node Create - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF PROVISION NODE CREATE

atmf provision node create
Overview This command sets up an empty directory on the backup media for use with a
provisioned node. This directory can have configuration and release files copied to
it from existing devices. Alternatively, the configuration files can be created by the
user.
An alternative way to create a new provisioned node is with the command
provision node
This command can only run on AMF master nodes.
atmf provision node <nodename> create
Syntax
Mode Privileged Exec
Usage This command is only available on master nodes in the AMF network.
The
executed before you can use other atmf provision node commands with the
specified node name. If a backup or provisioned node already exists for the
specified node name then you must delete it before using this command.
A date and time is assigned to the new provisioning directory reflecting when this
command was executed. If there is a backup or provisioned node with the same
name on another AMF master then the most recent one will be used.
Example To create a new provisioned node named device2 use the command:
device1#
Running this command will create the following directories:
•
•
To confirm the new node's settings, use the command:
device1#
The output for the show atmf backup command is shown in the following figure,
and shows details for the new provisioned node device2.
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
clone.
Parameter
<nodename>
atmf provision node create
atmf provision node device2 create
<media>:atmf/<atmf_name>/nodes/<node>
<media>:atmf/<atmf_name>/nodes/<node>/flash
show atmf backup
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The name of the node that is being provisioned.
command (or atmf provision node
atmf
clone) must be
2071