Table of Contents
Advertisement
A
T
M
F
LLIED
ELESIS
ANAGEMENT
SHOW ATMF PROVISION NODES
show atmf provision nodes
Overview
This command displays information about each provisioned node with details
about date and time of creation, boot and configuration files available in the
backup, and license files present in the provisioned backup. This includes nodes
that have joined the network but are yet to run their first backup.
This command can only be run on AMF master and controller nodes.
show atmf provision nodes
Syntax
Mode
Privileged Exec
Usage
This command will only work if provisioned nodes have already been set up.
Otherwise, an error message is shown when the command is run.
Example
To show the details of all the provisioned nodes in the backup use the command:
NodeName#
Figure 50-17: Sample output from the show atmf provision nodes command
device1#show atmf provision nodes
ATMF Provisioned Node Information:
Backup Media .............: SD (Total 3827.0MB, Free 3481.1MB)
Node Name
Date& Time
Provision Path
Boot configuration :
Current boot image
Backup
boot image
Default boot config
Current boot config
Backup
boot config
Software Licenses :
Repository file
Certificate file
Related
atmf provision node create
commands
atmf provision node clone
atmf provision node configure boot config
atmf provision node configure boot system
show atmf backup
C613-50103-01 REV A
™ (AMF) C
RAMEWORK
OMMANDS
show atmf provision nodes
: device2
: 06-May-2014 & 23:25:44
: card:/atmf/provision_nodes
: x510-1766_atmf_backup.rel (file exists)
: x510-main-20140113-2.rel (file exists)
: flash:/default.cfg (file exists)
: flash:/abc.cfg (file exists)
: flash:/xyz.cfg (file exists)
: ./.configs/.sw_v2.lic
: ./.configs/.swfeature.lic
: card:/atmf/nodes/awplus1/flash/.atmf-lic-cert
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2157
Advertisement
Table of Contents
