Atmf Provision - Allied Telesis x310-26FT Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF PROVISION

atmf provision
Overview This command configures a specified port on an AMF node to accept a provisioned
node, via an AMF link, some time in the future.
Use the no variant of this command to remove the provisioning on the node.
Syntax atmf provision [<nodename>]
no atmf provision
Default No AMF provisioning.
Mode Interface Configuration for a switchport, a static aggregator or a dynamic channel
group.
Usage The port should be configured as an AMF link or cross link and should be "down"
to add or remove a provisioned node.
Example To provision an AMF node named node1 for port1.0.1, use the command:
host1(config)#
host1(config-if)#
Related switchport atmf-link
Commands
switchport atmf-crosslink
show atmf links
C613-50103-01 REV A
™ (AMF) C
RAMEWORK OMMANDS
Parameter
<nodename>
interface port1.0.1
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The name of the provisioned node that will appear on
the AMF network in the future.
atmf provision node1
2066