D
H
C
YNAMIC
OST
ONFIGURATION
IP DHCP POOL
ip dhcp pool
Overview
This command will enter the configuration mode for the pool name specified. If
the name specified is not associated with an existing pool, the device will create a
new pool with this name, then enter the configuration mode for the new pool.
Once you have entered the DHCP configuration mode, all commands executed
before the next exit command will apply to this pool.
You can create multiple DHCP pools on devices with multiple interfaces. This
allows the device to act as a DHCP server on multiple interfaces to distribute
different information to clients on the different networks.
The no variant of this command deletes the specific DHCP pool.
ip dhcp pool <pool-name>
Syntax
no ip dhcp pool <pool-name>
Mode
Global Configuration
To create the DHCP pool named P2 and enter DHCP Configuration mode, use the
Example
commands:
awplus#
awplus(config)#
awplus(dhcp-config)#
To delete the DHCP pool named P2, use the commands:
awplus#
awplus(config)#
Related
service dhcp-server
Commands
C613-50103-01 REV A
P
(DHCP) C
ROTOCOL
OMMANDS
Parameter
<pool-name>
configure terminal
ip dhcp pool P2
configure terminal
no ip dhcp pool P2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Description used to identify this DHCP pool. Valid characters
are any printable character. If the name contains spaces then
you must enclose it in "quotation marks".
2195