Clear Ip Dhcp Binding - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION

CLEAR IP DHCP BINDING

clear ip dhcp binding
Overview This command clears either a specific lease binding or the lease bindings specified
by the command or DHCP server. The command will only take effect on
dynamically allocated bindings, not statically configured bindings.
clear ip dhcp binding {ip <ip-address>|mac
Syntax
<mac-address>|all|pool <pool-name>|range <low-ip-address>
<high-ip-address>}
Mode User Exec and Privileged Exec
Usage A specific binding may be deleted by ip address or mac address, or several
bindings may be deleted at once using all, pool or range.
Note that if you specify to clear the ip or mac address of what is actually a static
DHCP binding, an error message is displayed. If all, pool or range are specified and
one or more static DHCP bindings exist within those addresses, any dynamic
entries within those addresses are cleared but any static entries are not cleared.
To clear the specific IP address binding 192.168.1.1, use the command:
Examples
awplus#
To clear all dynamic DHCP entries, use the command:
awplus#
Related show ip dhcp binding
Commands
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
ip <ip-address>
mac <mac-address>
all
pool <pool-name>
range<low-ip-address>
<high-ip-address>
clear ip dhcp binding ip 192.168.1.1
clear ip dhcp binding all
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
IPv4 address of the DHCP client, in dotted decimal
notation in the format A.B.C.D.
MAC address of the DHCP client, in hexadecimal
notation in the format HHHH.HHHH.HHHH.
All DHCP bindings.
Description used to identify DHCP server address
pool. Valid characters are any printable character. If
the name contains spaces then you must enclose
these in "quotation marks".
IPv4 address range for DHCP clients, in dotted
decimal notation. The first IP address is the low end of
the range, the second IP address is the high end of the
range.
2184