Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

51

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available at the above link on alliedtelesis.com.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A
Protocol (DHCP)
"bootfile" on page 2183
"clear ip dhcp binding" on page 2184
"default-router" on page 2185
"dns-server" on page 2186
"domain-name" on page 2187
"host (DHCP)" on page 2188
"ip address dhcp" on page 2189
"ip dhcp bootp ignore" on page 2191
"ip dhcp leasequery enable" on page 2192
"ip dhcp option" on page 2193
"ip dhcp pool" on page 2195
"ip dhcp-relay agent-option" on page 2196
"ip dhcp-relay agent-option
"ip dhcp-relay agent-option
"ip dhcp-relay information
"ip dhcp-relay maxhops" on page 2202
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
checking" on page 2198
remote-id" on page 2199
policy" on page 2200
Guide,
"Getting Started
Guide. This guide is
2181