A
T
M
F
LLIED
ELESIS
ANAGEMENT
SHOW ATMF LINKS STATISTICS
show atmf links statistics
Overview
This command displays details of the AMF links configured on the device and also
displays statistics about the AMF packet exchanges between the devices.
It is also possible to display the AMF link configuration and packet exchange
statistics for a specified interface.
This command can only be run on AMF master and controller nodes
show atmf links statistics [interface [<port_number>]]
Syntax
Mode
User Exec
Example 1
To display AMF link statistics for the whole device, use the command:
device1#
Table 51: Sample output from the show atmf links statistics command
ATMF Statistics:
--------------------------------------------------------------------------------
Arealink Hello
Crosslink Hello
Crosslink Hello Domain
Crosslink Hello Uplink
Hello Link
Hello Neighbor
Hello Stack
Hello Gateway
Database Description
Database Request
Database Update
Database Update Bitmap
Database Acknowledge
C613-50103-01 REV A
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
interface
<port_number>
show atmf links statistics
Receive
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Specifies that the command applies to a specific interface
(port) or range of ports. Where both the interface and port
number are unspecified, full statistics (not just those relating to
ports will be displayed.
Enter the port number for which statistics are required. A port
range, a static channel or LACP link can also be specified.
Where no port number is specified, statistics will be displayed
for all ports on the device.
Transmit
318
327
164
167
89
92
86
88
0
0
628
630
0
0
1257
1257
28
28
8
6
66
162
0
29
144
51
2151