Bootfile - Allied Telesis x310-26FT Command Reference Manual

D H C
YNAMIC OST ONFIGURATION

BOOTFILE

bootfile
Overview This command sets the boot filename for a DHCP server pool. This is the name of
the boot file that the client should use in its bootstrap process. It may need to
include a path.
The no variant of this command removes the boot filename from a DHCP server
pool.
bootfile <filename>
Syntax
no bootfile
Mode DHCP Configuration
To configure the boot filename for a pool P2, use the command:
Example
awplus#
awplus(config)#
awplus(dhcp-config)#
C613-50103-01 REV A
P (DHCP) C
ROTOCOL OMMANDS
Parameter
<filename>
configure terminal
ip dhcp pool P2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The boot file name.
bootfile boot/main_boot.bt
2183