A
T
M
F
LLIED
ELESIS
ANAGEMENT
SHOW ATMF GUEST
show atmf guest
Overview
This command is available on any AMF master in the network. It displays details
about the AMF guest nodes that exist in the AMF network, such as device type, IP
address and MAC address etc.
show atmf guest [<node-name>] [<guest-port>]
Syntax
Mode
User Exec/Privileged Exec
Example
To display the ATMF guest output, use the command:
awplus#
Output
Figure 50-11: Example output from the show atmf guest command.
master#show atmf guests
Guest Information:
Device
Name
---------------------------------------------------------------------
master-2.1.1
master-2.1.2
master-2.1.4
Current ATMF guest node count 3
Table 56: Parameters shown in the output of the show atmf guest command
C613-50103-01 REV A
™ (AMF) C
RAMEWORK
OMMANDS
Parameter
Description
<node-name>
The name of the guest node's parent.
<guest-port>
The port name on the parent node.
show atmf guest
Device
Parent
Type
Node
AR415S
master
AT-9924T
master
AT-TQ3200
master
Parameter
Device Name
Device Type
Parent Node
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Guest
IP/IPv6
Port
Address
2.1.1
192.168.2.10
2.1.2
192.168.1.10
2.1.4
192.168.1.12
Description
The name that is discovered from the device, or failing
that, a name that is auto-assigned by AMF. The
auto-assigned name consists of <parent node
name>-<attached port number>
This is the product name of the Guest Node and is
discovered from the device. If no device Type can be
discovered, then the modelName configured on the
Guest-class assigned to the connected port is used.
The AMF member name of the AMF member that directly
connects to the guest node.
2135