Hitachi Compute Blade 2000 User Manual page 1761

(b) snmpUsmMIB group (2/2)
Object
No
identifier
15 usmUserAut .1.3.6.1.6.3.15
hKeyChange .1.1.2.1.6
16 usmUserOw .1.3.6.1.6.3.15
nAuthKeyCh .1.1.2.1.7
ange
17 usmUserPriv .1.3.6.1.6.3.15
Protocol .1.1.2.1.8
18 usmUserPriv .1.3.6.1.6.3.15
KeyChange .1.1.2.1.9
19 usmUserOw .1.3.6.1.6.3.15
nPrivKeyCha .1.1.2.1.10
nge
20 usmUserPub .1.3.6.1.6.3.15
lic .1.1.2.1.11
21 usmUserStor .1.3.6.1.6.3.15
ageType .1.1.2.1.12
22 usmUserStat .1.3.6.1.6.3.15
us .1.1.2.1.13
(*1) This object is RW in the SNMP standard, but RO for this equipment.
OID Syntax
RO (*1)
RO (*1)
RO (*1)
RO (*1)
RO (*1)
RO (*1)
RO (*1)
RO (*1)
1710
Description
Object to create a snmp engine
authentication key shown in
usmUserEngineID. This object is
set when usmUserName of a
requester is different from
usmUserName of this entry. This
object is fixed at ' 'H.
Object to create a snmp engine
authentication key shown in
usmUserEngineID. This object is
set when usmUserName is
different from usmUserName of
this entry. This object is fixed at
'H'.
Used by the privacy protocol of
the SNMP engine shown in
usmUserEngineID. One of the
following values is shown:
1: usmNoPrivProtocol (No
encryption)
2: usmDESPrivProtocol (DES
encryption)
3: usmAesCfb128Protocol (AES
encryption)
Object to create an encryption
key shown in usmUserEngineID.
This object is set when
usmUserName of a requester is
different from sumUserName of
this entry.
Object to create an encryption
key shown in usmUserEngineID.
This object is set when
usmUserName of a requester is
different from sumUserName of
this entry. This object is fixed at
' 'H.
User authentication key: this
value is created when an
encryption key is changed. It can
be used later to determine if the
key change is enabled or not.
This object is fixed at ' 'H.
Storage type of the user entry.
This value is fixed at permanent
(4).
Shows status of the user entry.
This value is fixed at activate (1).