Hitachi Compute Blade 2000 User Manual page 1752

(b) interfaces group (1/2)
Object
No
identifier
1 ifNumber
2 ifTable
3 ifEntry
4 ifIndex
5 ifDescr
6 ifType
7 ifMtu
8 ifSpeed
9 ifPhysAddress
10 ifAdminStatus
11 ifOperStatus
12 ifInOctets
13 ifInUcastPkts
14 IfInNUcastPkts
15 ifInDiscards
16 ifInErrors
17 ifUnknown
Prots
18 ifOutOctets
(*1) This object includes the information only on some interfaces.
(*2) This object is RW in the SNMP standard, but RO for this equipment.
Acces
OID
s
.1.3.6.1.2. RO Shows the number of interfaces that the
1.2.1 management equipment has.
.1.3.6.1.2. NA Shows the table for setting interfaces.
1.2.2
.1.3.6.1.2. NA Shows the list for setting interfaces.
1.2.2.1
.1.3.6.1.2. RO Shows the number to identify each interface.
1.2.2.1.1 The value is from 1 to ifNumber. (*1)
.1.3.6.1.2. RO Shows the information on each interface. (*1)
1.2.2.1.2
.1.3.6.1.2. RO Shows the type of each interface:
1.2.2.1.3 Ethernet-csmacd (6) for this equipment. (*1)
.1.3.6.1.2. RO Shows the maximum diagram size in octet that
1.2.2.1.4 each interface can send and receive. (*1)
.1.3.6.1.2. RO Shows the current circuit speed of each interface
1.2.2.1.5 in bit/s. (*1)
.1.3.6.1.2. RO Shows the physical address of each interface.
1.2.2.1.6 (*1)
.1.3.6.1.2. RO Shows the desirable state of each interface. (*1)
1.2.2.1.7 (*2) One of the following values is shown.
* up (1)
* down (2)
* testing (3)
.1.3.6.1.2. RO Shows the current status of each interface. (*1)
1.2.2.1.8 One of the following values is shown.
* up (1)
* down (2)
* testing (3)
.1.3.6.1.2. RO Shows the total number of octets that each
1.2.2.1.10 interface has received. (*1)
.1.3.6.1.2. RO Shows the number of unicast packets that each
1.2.2.1.11 interface has received. (*1)
.1.3.6.1.2. RO Shows the number of non-unicast packets that
1.2.2.1.12 each interface has received. (*1)
.1.3.6.1.2. RO Shows the number of packets discarded not
1.2.2.1.13 because of an error among incoming packets to
each interface. (*1)
.1.3.6.1.2. RO Shows the number of error packets among
1.2.2.1.14 incoming packets to each interface. (*1)
.1.3.6.1.2. RO Shows the number of packets discarded due to
1.2.2.1.15 the unsupported protocol among incoming
packets to each interface. (*1)
.1.3.6.1.2. RO Shows the total number of octets sent by each
1.2.2.1.16 interface. (*1)
1701
Description