Hitachi Compute Blade 2000 User Manual page 1724

(b) moduleStatusMm group (5/7)
Object
No
identifier
30 mmVoltSensor6
Value
31 mmVoltSensor6
Valid
32 mmVoltSensor7
Name
33 mmVoltSensor7
Value
34 mmVoltSensor7
Valid
35 mmVoltSensor8
Name
36 mmVoltSensor8
Value
(*1) "unknown" is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) "unknown" is shown when no management module is installed or the status cannot be
obtained. "power-off" is shown after executing SDN in the process of setting
redundancy.
(*3) "0" is shown as the number of sensor when no management module is installed.
(*4) "Not install" is shown if no management module is installed or redundancy setting is on
the process; "Cannot get data" is shown if the data cannot be obtained.
(*5) "0" is shown if no management module is installed or redundancy setting is on the
process, if the data cannot be obtained, or if no sensor exists.
OID Syntax
.1.3.6.1.4.1 Integer32
.116.5.39.3
.3.2.1.18
.1.3.6.1.4.1 INTEGER
.116.5.39.3
.3.2.1.19
.1.3.6.1.4.1 Display
.116.5.39.3 String
.3.2.1.20
.1.3.6.1.4.1 Integer32
.116.5.39.3
.3.2.1.21
.1.3.6.1.4.1 INTEGER
.116.5.39.3
.3.2.1.22
.1.3.6.1.4.1 Display
.116.5.39.3 String
.3.2.1.23
.1.3.6.1.4.1 Integer32
.116.5.39.3
.3.2.1.24
1673
Access Description
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1V.
The actual value is one-tenth of
the response value.
Shows the voltage value
RO
validity of the management
module in the slot shown in
#5. One of the following
values is shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1V.
The actual value is one-tenth of
the response value.
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1V.
The actual value is one-tenth of
the response value.