Hitachi Compute Blade 2000 User Manual page 1723

(b) moduleStatusMm group (4/7)
Object
No
identifier
23 mmVoltSensor
4Name
24 mmVoltSensor
4Value
25 mmVoltSensor
4Valid
26 mmVoltSensor
5Name
27 mmVoltSensor
5Value
28 mmVoltSensor
5Valid
29 mmVoltSensor
6Name
(*1) "unknown" is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) "unknown" is shown when no management module is installed or the status cannot be
obtained. "power-off" is shown after executing SDN in the process of setting
redundancy.
(*3) "0" is shown as the number of sensor when no management module is installed.
(*4) "Not install" is shown if no management module is installed or redundancy setting is on
the process; "Cannot get data" is shown if the data cannot be obtained.
(*5) "0" is shown if no management module is installed or redundancy setting is on the
process, if the data cannot be obtained, or if no sensor exists.
(*6) "invalid" is shown if no management module is installed or redundancy setting is on the
process; "unknown" is shown if no data is obtained".
OID Syntax
.1.3.6.1.4.1.1 Display
16.5.39.3.3.2 String
.1.11
.1.3.6.1.4.1.1 Integer32
16.5.39.3.3.2
.1.12
.1.3.6.1.4.1.1 INTEGER
16.5.39.3.3.2
.1.13
.1.3.6.1.4.1.1 Display
16.5.39.3.3.2 String
.1.14
.1.3.6.1.4.1.1 Integer32
16.5.39.3.3.2
.1.15
.1.3.6.1.4.1.1 INTEGER
16.5.39.3.3.2
.1.16
.1.3.6.1.4.1.1 Display
16.5.39.3.3.2 String
.1.17
1672
Access Description
RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1 V.
The actual value is one-tenth of
the response value.
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the switch and
management module installed
in the slot shown in #5. (*4)
RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1 V.
The actual value is one-tenth of
the response value.
RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)