Show Logging Auditlog - Dell S6100 Configuration Manual

Example
Dell(conf)#logging version ?
<0-1> Select syslog version (default = 0)
Dell(conf)#logging version 1

show logging auditlog

Displays an audit log.
Syntax show logging auditlog
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.5(0.0)
Example
Dell(conf)# show logging auditlog
Related Commands
•
show logging
Display the logging settings and system messages logged to the internal buffer of the switch.
Syntax show logging [number | history [reverse][number] | reverse [number] | summary]
Parameters
number
history
reverse
summary
1536 Simple Network Management Protocol (SNMP) and Syslog
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
clear logging auditlog — clear the audit log.
(OPTIONAL) Enter the number of messages displayed in the output. The range is from 1
to 65535.
(OPTIONAL) Enter the keyword history to view only information in the Syslog history
table.
(OPTIONAL) Enter the keyword reverse to view the Syslog messages in FIFO (first in,
first out) order.
(OPTIONAL) Enter the keyword summary to view a table showing the number of
messages per type and per slot. Slots *7* and *8* represent RPMs.