Modifying Avlan; The Modify Vlan Dialog, Properties And Ports Page - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

U VLAN M
SING THE ANAGER
M VLAN
ODIFYING A
Users with Administrator or Manager access can modify the properties of a VLAN, and
add and remove ports from the VLAN. If you have Monitor access, you will not be able
to use this function.
To modify a VLAN, follow these steps:
1 Click the Modify button in the VLAN Manager panel.
The Modify VLAN dialog, Properties & Ports page is displayed, as shown in
Figure 7-8.
Figure 7-8: The Modify VLAN dialog, Properties and Ports page
2 Select a VLAN from the drop-down list in the VLAN Name field.
The current values for the VLAN are displayed.
Note: The Ports in VLAN list does not display SummitLink ports, because you
cannot modify them.
3 To change the Protocol Filter selection, select a different entry from the pull-down
Protocol Filter list.
4 To change the VLAN tag, type a new value into the Tag field.
To disable tagging for the VLAN, type "untagged" or 0 (zero) into the Tag field.
7-10 E W E M
XTREME ARE NTERPRISE ANAGER
I U G
NSTALLATION AND SER UIDE