Clear Ip Ospf Process - Enterasys N Standalone (NSA) Series Configuration Manual

13.2.3.29 clear ip ospf process

Use this command to reset the OSPF process. This will require adjacencies to be reestablished and
routes to be reconverged.
clear ip ospf process process-id
Syntax Description
process-id
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
None.
Example
This example shows how to reset OSPF process 1:
Matrix>Router1#clear ip ospf process 1
Routing Protocol Configuration Command Set
Specifies the process ID, an internally used identification
number for each instance of the OSPF routing process run
on a router. Valid values are 1 to 65535.
Matrix NSA Series Configuration Guide
Configuring OSPF
13-73