Enterasys N Standalone (NSA) Series Configuration Manual page 1127

13.2.3.31 rfc1583compatible
Use this command to enable the OSPF router for RFC 1385 compatibility.
rfc1583compatible
Syntax Description
None
Command Syntax of the "no" Form
The "no" form of this command removes OSPF RFC 1583 compatible:
no rfc1583compatible
Command Type
Router command.
Command Mode
Router configuration: Matrix>Router1(config-router)#
Command Defaults
None.
Example
This example shows how to configure RFC 1583 compatibility:
Matrix>Router1(config)#router ospf 1
Matrix>Router1(config-router)#rfc1583compatible
Routing Protocol Configuration Command Set
Matrix NSA Series Configuration Guide
Configuring OSPF
13-75