Secondary Network Interface Settings; Network Time Protocol (Ntp) Settings - Dell PowerConnect W-AirWave 7.6 User Manual

Table 14:
Primary Network Interface Fields and Default Values
Setting
IP Address
Hostname
Subnet Mask
Gateway
Primary DNS IP
Secondary DNS IP

Secondary Network Interface Settings

Locate the Secondary Network Interface section. The information in this section should match what you defined
during initial network configuration and should not require changes.
values.
Table 15:
Secondary Network Interface Fields and Default Values
Setting
Enabled
IP Address
Subnet Mask

Network Time Protocol (NTP) Settings

On the AMP Setup > Network page, locate the Network Time Protocol (NTP) section. The Network Time
Protocol is used to synchronize the time between AirWave and your network's NTP server. NTP servers synchronize
with external reference time sources, such as satellites, radios, or modems.
NOTE: Specifying NTP servers is optional. NTP servers synchronize the time on the AirWave server, not on individual access points.
To disable NTP services, clear both the Primary and Secondary NTP server fields. Any problem related to
communication between AirWave and the NTP servers creates an entry in the event log.
settings and default values in more detail. For more information on ensuring that AirWave servers have the correct
time, please see
http://support.ntp.org/bin/view/Servers/NTPPoolServers.
Table 16:
AMP Setup > Network > Secondary Network Fields and Default Values
Setting Default
Primary ntp1.yourdomain.com
Secondary ntp2.yourdomain.com
26 | Configuring AirWave
Default Description
Sets the IP address of the AirWave network interface.
None
NOTE: This address must be a static IP address.
None Sets the DNS name assigned to the AirWave server.
None Sets the subnet mask for the primary network interface.
None Sets the default gateway for the network interface.
None Sets the primary DNS IP address for the network interface.
None Sets the secondary DNS IP address for the network interface.
Default Description
Select Yes to enable a secondary network interface. You will be promted to define
No
the IP address and subnet mask.
Specify the IP address of the AirWave secondary network.
None
NOTE: This address must be a static IP address.
None Specify the subnet mask for the secondary network interface.
Description
Sets the IP address or DNS name for the primary NTP server.
Sets the IP address or DNS name for the secondary NTP server.
Table 15 describes the settings and default
Table 16
Dell PowerConnect W-AirWave 7.6 | User Guide
describes the