Last Steps In Editing An Uploaded Image; Provisioning Existing Access Points Onto The Floor Plan - Dell PowerConnect W-AirWave 7.6 User Manual

Figure 235:
Checking for CAD errors

Last Steps in Editing an Uploaded Image

Click the Save and Close button to begin provisioning APs or Save and New to upload another floor plan. After
clicking Save and Close, you are redirected back into QuickView where you can provision APs, Wiring Closets, and
wired infrastructure.

Provisioning Existing Access Points onto the Floor Plan

To provision existing AP in your network onto the floor plan you just uploaded, follow these steps:
1. Navigate to VisualRF > Floor Plans.
2. Select the floor plan you have uploaded using the floor number or name links in the list.
3. Select the Add Deployed Device icon in the Edit menu. A pop-up window list of devices in your AirWave
appears, as shown on
4. Select whether to navigate by Group or by Folder in the View By field.
NOTE: Wired-only access device, such as RAP-5, do not have any radios and, therefore, should not be included on a floor plan.
5. Select whether to navigate by Group or by Folder in the View By field.
NOTE: Alternatively, you can use the Search field.
6. Expand the Group or Folder containing the access points which need to be provisioned on this floor plan. Note
that by default, devices that have already been added to VisualRF are hidden. To show them, clear the Hide
Devices already added to VisualRF checkbox at the bottom of the list.
7. Click and drag an AP to its proper location on the floor, as shown in
Dell PowerConnect W-AirWave 7.6 | User Guide
Figure 236
Figure 236:
Using VisualRF | 301