Area Authentication; Area Nssa; Area Default-Cost; Area Nssa Default-Info-Originate - Dell Force10 S2410-01-10GE-24P Command Reference Manual

area authentication

Command
Version 2.3
History

area default-cost

This command configures the monetary default cost for the stub area. The operator must specify the
area ID and an integer value between 1-16777215.
area areaid default-cost 1-16777215
Syntax
Mode Router OSPF Config

area nssa

This command configures the specified areaid to function as an NSSA (Not So Stubby Area).
The no version of this command disables nssa from the specified area ID.
[no] area areaid nssa
Syntax
Mode
Router OSPF Config

area nssa default-info-originate

This command configures the metric value and type for the default route advertised into the NSSA.
area areaid nssa default-info-originate [ metric ] [{comparable | non-comparable}]
Syntax
The optional metric parameter specifies the metric of the default route and is to be in a range of
1-16777215. If no metric is specified, the default value is ****. The metric type can be comparable
(nssa-external 1) or non-comparable (nssa-external 2).
Mode
Router OSPF Config

area nssa no-redistribute (OSPF)

This command configures the NSSA ABR (Area Border Router) so that learned external routes will
not be redistributed to the NSSA.
area areaid nssa no-redistribute
Syntax
Mode
Router OSPF Config
Deprecated
OSPF Commands | 425