Ip Vrrp Priority; Ip Vrrp Timers Advertise - Dell Force10 S2410-01-10GE-24P Command Reference Manual

ip vrrp priority

Syntax
Default
Mode
Command
History
Related
Commands

ip vrrp timers advertise

Syntax
Default
Mode
Command
History
Related
Commands
| Routing Commands
418
This command sets the priority value for the virtual router configured on a specified interface.
ip vrrp vrID priority 1-254
The parameter vrID is the virtual router ID, which is an integer that ranges from 1 to 255.
The priority of the interface is an integer from 1 to 254.
The no ip vrrp vrID priority command sets the default priority value for the virtual router configured
on a specified interface.
100
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3 Added Interface Range and Interface VLAN modes.
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
This command sets the advertisement value for a virtual router.
ip vrrp vrID timers advertise 1-255
The parameter vrID is the virtual router ID, which is an integer that ranges from 1 to 255.
The value for advertise interval is the time used for VRRP advertisements in seconds.
The no ip vrrp vrID timers advertise command sets the default advertisement value for a virtual
router.
1
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Version 2.3 Added Interface Range and Interface VLAN modes.
interface range Defines an interface range and accesses the Interface Range mode