Mac Access-List Extended; Mac Access-List Extended Rename - Dell Force10 S2410-01-10GE-24P Command Reference Manual

mac access-list extended

Syntax
Parameters
Mode
Related
Commands

mac access-list extended rename

Syntax
Parameters
Mode
| ACL Commands
386
This command creates a MAC Access Control List (ACL) identified by
classification fields defined for the Layer 2 header of an Ethernet frame.
Note:
The CLI mode is changed to Mac Access List Config (prompt is "
(Mac-Access-List Config)#") when this command is successfully executed. If a MAC ACL
by this name already exists, this command simply invokes the mode.
The no version of this command deletes a MAC ACL identified by
mac access-list extended
name
Global Config
{deny|permit}
interface range
mac access-group (port
channel)
mac access-group
mac access-list extended
rename
show mac access-lists
This command changes the name of an existing MAC ACL. The
existing MAC ACL. The newname
characters uniquely identifying the MAC access list.
This command fails if a MAC ACL by the name
mac access-list extended rename
name
newname
Global Config
name
Case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying
the MAC access list. The string may include alphabetic, numeric, dash, dot or
underscore characters only. The string must start with a letter.
Creates a new rule for the MAC access list selected by the
access-list extended
Defines an interface range and accesses the Interface Range mode
In the Interface Port Channel Config mode, attaches a MAC ACL to the
selected port channel
Attaches a specific MAC Access Control List (ACL) identified by
an interface in the ingress direction
Changes the name of an existing MAC ACL.
Displays the rules defined for the MAC access list specified by
parameter is a case-sensitive alphanumeric string from 1 to 31
newname
name newname
The ACL name assigned during the creation of the ACL by using the
access-list extended
command
Case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying
the MAC access list. The string may include alphabetic, numeric, dash, dot or
underscore characters only. The string must start with a letter.
name , consisting of
hostname
name from the system.
command.
name parameter is the name of an
already exists.
mac
name
to
name
.
mac