List of tables ETS objects creation 1-25 1-25 .............................. Port to ifIndex mapping table ........................................................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
List of figures Media-specific interface MIB tables 1-16 1-16 ........................ EVC over ETS example 1-25 1-25 ............................ETS MIB tables 1-26 1-26 ............................................................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
This document aims to describe the usage of this MIB from the management system point of view. It is proposed by Alcatel-Lucent to customers in order to help the development of a dedicated management system dealing with the full discovery and provisioning of the ES64U.
Purpose This section describes the supported S MP tables, columnar objects, and scalar objects for the ES64U. Detailed information about the ES64U management interface can be found in the 1675 LambdaUnite MSS User Provisioning Guide. SNMP MIB – managed entities The different logical objects managed in the ETS MIBs, and their relationships are depicted in the following figure.
Page 14
Ethernet ETS Interface (local or remote) 0..1 SDH physical interface Contents System System MIB Interfaces Generic interface MIB Ethernet Layer MIB 1-13 GFP Transmission Layers MIB 1-15 Error logs 1-17 ..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Upload PM per queue information 1-72 Service mirroring management 1-75 Mirror interface definition 1-76 Inflow mirror port 1-77 Inflow mirror flag 1-78 Outflow mirror port 1-79 Outflow mirror flag 1-80 ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
Page 16
1+1 LAG port activate 1-90 1+1 LAG group activate 1-91 1+1 LAG group deactivate 1-93 1+1 LAG Upload 1-94 1-95 Support Overview 1-95 Restart and truncate database 1-96 ..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
[6,7] represents the Maintenance version (number) sysDescr Example: For example, ‘V010100’ represents version 1.1. sysObjectID (SNMPv2-MIB) The vendor's authoritative identification of the network management subsystem. This scalar is set to “Alcatel-Lucent”. Object identifier (OID): 1.3.6.1.2.1.1.2 Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysObjectID(2) ..............................................365-374-201R11.1.1 Alcatel-Lucent –...
Page 18
Object identifier (OID): 1.3.6.1.2.1.1.7 Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysServices(7) Example: (2 – 1) ES64U, which is a layer 2 switch, has a value of 2 (2 ..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
I. For one of these rows, I is the value ; for the other, I is the value of . (If I is ifStackHigherLayer ifStackLowerLayer ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
Page 20
= active ifInvStackStatus.z.0 = active ifInvStackStatus.0.z This table contains exactly the same number of rows as the , but the rows ifStackTable appear in a different order..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 21
IfXTable (IF-MIB) A list of interface entries. The number of entries is given by the value of if umber. This table contains additional objects for the IfTable ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
Page 22
Reference to the underlying path layer. 1 - SDH/Sonet TsdimIfUnderlieLayer OpticsIMEthConfTable (OPTICSIM-ETHNE-MIB) This media-specific interface table is used to define the proprietary configuration parameters for the Ethernet interfaces..............................................1-10 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 23
Initial value = ifSpeed * (60 72)*(CirOverbookingFactor/ 100) • In case of rate limit ≠ 0 • Initial value = ifSpeed * (60 84)*(CirOverbookingFactor/ 100) OpticsIMEthConfVLANEtherType ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-11 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 24
Define the label for this type Unique field opticsIMEthVLANTypeRowStatus(RC) Used to create, modify or delete a row in CreateAndWait(5),CreateAndGo(4)Active(1), the table otReady(3), otInService(2), or Destroy(6) ..............................................1-12 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
A unique value greater than 0 (RW) opticsIMEthVLANTypeEtherType Define the protocol type (default 0x8100) >0x600 , not including: (RW) opticsIMEthVLANTypeUserLabel Define the label for this type Unique field ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-13 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 26
..............................................opticsIMEthVLANTypeTable MIB field name Description Value (RC) opticsIMEthVLANTypeRowStatus Used to create, modify or delete a row in CreateAndWait(5),CreateAndGo(4)Active(1), the table otReady(3), otInService(2), or Destroy(6) ..............................................1-14 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
MIB field name Description Value Index of interface in ifTable IfIndex Activation/Deactivation of GFP Frame 1- true opticsimGFPConfFcs Check Sequence usage (read-create) 2- false (default value) ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-15 Issue 1 March 2010 Use pursuant to applicable agreements...
The IP address of the Management not-accessible System setting the MIB attributes. opticsIMErrorLogSnmpRequest The S MP Reqest ID. not-accessible opticsIMErrorLogErrorTex The error description. Read-Only String..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-17 Issue 1 March 2010 Use pursuant to applicable agreements...
OpticsIMETSTrafficDescrParam2 Peak Information Rate (Kbps) PIR value (default value in E: '0'b) OpticsIMETSTrafficDescrParam3 Committed Burst Size (Bytes) CBS value (default value in E: '0'b) OpticsIMETSTrafficDescrParam4 ..............................................1-18 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 31
Identifier of the pointed cross-connection Value of opticsIMETSCrossConnectIndex. (opticsIMETSCrossConnectTable) Read-only field. It is initialized automatically by the E agent after the entry in the cross-connect table has been created ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-19 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 32
1-ethernet (default value) carried OpticsIMETSOutFlow ServerID Contains the appropriate value, server type Value of ifIndex (ifTable) dependent. OpticsIMETSOutFlow UserLabel Canonical name assigned to the flow Configurable string, ..............................................1-20 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 33
TAC1 port(default) the outflow (if it allowed – mirror to TAC2 port nn MXOpticsExtETSOutflowMirror field) The value is irrelevant while nn MXOpticsExtETSOutflowMirror is 2 ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-21 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 34
Destroy (ETS MIB) OpticsIMETSCrossConnectTable MIB field name Description Value OpticsIMETSCrossConnectIndex index of the table Result of Get method on opticsIMETSCrossConnectIndex ext OpticsIMETSCrossConnectInFlow Index ..............................................1-22 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 35
Can't have the same Vlan (or to overlap). OpticsIMEth2ETSFlowClassifier MaxVlan max VLA ID • 0 - no range managed (default value) • 1..4094 OpticsIMEth2ETSFlowClassifier Priority ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-23 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 36
An entry is created, in this table, automatically by the agent, when an entry is activated by the manager in the with opticsIMETSOutFlowTable equal to 'active'. opticsIMETSOutFlowRowStatus ..............................................1-24 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 37
Only if needed, because the same ETS Traffic Descriptor can be used by different Ethernet flows. The following figure shows the relations between the tables: ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-25 Issue 1 March 2010 Use pursuant to applicable agreements...
By default all sources pointed to profile #2 (=primary alarms) • (within tsdimIfAsapIndex opticsIMIfTable Open Alarm Table Show the open alarms table • tsdimAPTTable ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-27 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 40
There are 2 log tables, one for alarm and the other for events • – general description of each log (default maximum log size tsdimEventLogTable =1000) • – Log of all transmitted alarms tsdimAlarmLogTable ..............................................1-28 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
CSF events refer to failure events detected in the client signal on ingress (communicated to far-end by a CSF client management frame) or egress (client-specific mapping defects such as payload errors). Object identifier (OID): 1.3.6.1.4.1.637.54.1.1.5.1.40.55 Full path: ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-29 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 42
EMib(5).tsdimSnmp EMibObject(1).opticsIMCommonAlarms(40). opticsIMAlarmUserPayloadMismatchRaise(69) Events: tsdimAVCNotification Indicates a generic Attribute Value Change Event. Type: OTIFICATIO -TYPE Object identifier (OID): 1.3.6.1.4.1.637.54.1.1.3.1.20 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).tsdimBasicMib(1). tsdimSupportMib(3).tsdimSupportMibObject(1).tsdimAVC otification(20) ..............................................1-30 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 43
• Admin status is changed. • Oper status changed • Manager polling table change tsdimObjectCreationNotification Indicates a generic State Change Event. Object identifier (OID): 1.3.6.1.4.1.637.54.1.1.3.1.18 ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-31 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 44
This notification is being sent currently when • Row status = destroy entry for: – Pm per port (ethAggrCDRxRowStatus/ ethAggrCDTxRowStatus) – Pm per Queue (ethAggrPerQueueCDRowStatus) – External manager for traps (opticsIMMgrPollingRowStatus) ..............................................1-32 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Agent when the first manager polling time-out expires and it is deleted when the secondtime-outt expires. Object identifier (OID): 1.3.6.1.4.1.637.54.1.1.3.1.8 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).tsdimBasicMib(1). tsdimSupportMib(3).tsdimSupportMibObject(1).tsdimEFDTable(8) ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-33 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 46
After each retrieval, the agent should modify the value to the next unassigned index (or -1)..............................................1-34 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 47
This table associates profile index and trap ID pairs with severities to be used for alarm traps that have occurred. ( ote that this table does not apply to cleared alarms.) Object identifier (OID): 1.3.6.1.4.1.637.54.1.1.3.1.29 Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).tsdimBasicMib(1). tsdimSupportMib(3).tsdimSupportMibObject(1).tsdimAlarmSevTable(29) ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-35 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 48
Full path: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).alcatel(637).ltt(54).tsdim(1).tsdimBasicMib(1). tsdimSupportMib(3).tsdimSupportMibObject(1).tsdimAPTTable(2) (log MIB) tsdimAPTTable MIB field name Description Value tsdimAPTAlarmTimeIndex index – indicate the time the alarm Time ticks since 1970 occurred tsdimAPTAlarmNotificationId ..............................................1-36 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 49
Running Index of the table Running index (1-100) (RO) tsdimLogObjectClassIdentifier OID of the relevant pointed table (event or OID or tsdimEventLogTable alarm) tsdimAlarmLogTable (RW) tsdimLogAdminStatus ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-37 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 50
OID of trap as defined by MIB (RO) tsdimAlarmLogObjectClassIdentifier The number of nodes within Integer tsdimAlarmLogObjectInstanceIdentifier array (RO) tsdimAlarmLogObjectInstanceIdentifier The OID which describe the alarm source OID array (RO) tsdimAlarmLogSeverity ..............................................1-38 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 51
4 – state change (RO) tsdimEventLogObjectInstanceIdentifier The number of nodes within Integer tsdimEventLogObjectClassIdentifier array (RO) tsdimEventLogObjectClassIdentifier The OID which describe the event object OID array which has change ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-39 Issue 1 March 2010 Use pursuant to applicable agreements...
Check the alarm profile definitions, if needed, create a new alarm profile ) and change the pointed profile for the required source (step 3 tsdimAlarmSevTable again). S T E P S ...................................................................................... 1-40 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Delete the row from tsdimEFDTable ........................................Use the Index retrieved before (index = ) to delete the row tsdimEFDManagerIndex from opticsIMMgrPollingInfoTable S T E P S ...................................................................................... 365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-41 Issue 1 March 2010 Use pursuant to applicable agreements...
AttrVal.val = active / notInService – • AttrVal.oid = TSDIM-SUPPORT-MIB:: tsdimEFDManagerIndex • AttrVal.type = I TEGER • AttrVal.val = the index of the parallel row in opticsIMMgrPollingInfoTable ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-43 Issue 1 March 2010 Use pursuant to applicable agreements...
– • AttrVal.oid = TSDIM-SUPPORT-MIB:: tsdimAlarmSevProfileUserLabel • AttrVal.type = OCTET STRI G • AttrVal.val = free string which describe the name of the profile tsdimAlarmSevTable ..............................................1-44 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 57
– • AttrVal.oid = TSDIM-SUPPORT-MIB:: tsdimAlarmSevSeverity otServAff • AttrVal.type = I TEGER • AttrVal.val = 1- critical , 2 – major , 3 - minor ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-45 Issue 1 March 2010 Use pursuant to applicable agreements...
• Maintenance – Those counters are free running HW counters which start their collection on system initiation and available regardless the admin status of the interfaces. Those counters can not be controlled..............................................1-50 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Ethernet interfaces value as in IfTable (RO) ethAggrCDTxTTF TTF (counter 64 bits) The number of Ethernet frames transmitted out by the Virtual Ethernet Interface. (RO) ethAggrCDTxTTO ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-51 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 64
And the x period interval is x times intervals previous to the current one. (RO) ethAggrHDRxTRCF TRCF (counter 64 bits) (RO) ethAggrHDRxTRCO TRCO (counter 64 bits) ..............................................1-52 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 66
Index of the table Ethernet interfaces value as in IfTable (RO) ethAggrMainTxTTF TTF (counter 64 bits) (RO) ethAggrMainTxTTO TTO (counter 64 bits) (RO) ethAggrMainTxTDF TDF (counter 64 bits) ..............................................1-54 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
• AttrVal.type = TimeTicks • AttrVal.val = date & time by seconds since 1970 that the current counters collection have started Current Tx Counter Upload ..............................................1-58 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 71
• AttrVal.type = TimeTicks • AttrVal.val = date & time by seconds since 1970 that the current counters collection have started Maintenance Rx Counter Upload ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-59 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 72
AttrVal.val = umber of transmitted octets – • AttrVal.oid = OPTICSIM-ETHPM-MIB:: ethAggrMainTxTDF • AttrVal.type = Counter64 (64 bits) • AttrVal.val = umber of discarded frames History Rx Counter Upload ..............................................1-60 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 73
AttrVal.val = Truth or False if this interval is suspected to be not correctly & fully collected during all interval time History Tx Counter Upload ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-61 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 74
AttrVal.type = I TEGER • AttrVal.val = Truth or False if this interval is suspected to be not correctly & fully collected during all interval time ..............................................1-62 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
• Maintenance – Those counters are free running HW counters which start their collection on system initiation and available regardless the admin status of the interfaces. Those counters can not be controlled..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-63 Issue 1 March 2010 Use pursuant to applicable agreements...
Total Conforming Octets-green (counter 64 counter 64 bits bits) (RO) ethAggrPerQueueCDTnCO Total on Conforming Octets -yellow counter 64 bits (counter 64 bits) (RO) ethAggrPerQueueCDDiscardTCO ..............................................1-64 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 77
(#3) ethAggrPerQueueHDGranularityPeriod Index of the table - Granularity of the 1 – 15 minutes interval 2 – 24 hours (#4) ethAggrPerQueueHDPeriodEndtime ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-65 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 78
(for ex. – the 2 = False (should not be suspected) operation status was partially down, the clock has changed during this interval etc') ..............................................1-66 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 79
Total on Conforming Octets - yellow counter 64 bits (counter 64 bits) (RO) ethAggrPerQueueMainDiscardTCO Total Discard Conforming Octets - green counter 64 bits (counter 64 bits) (RO) ethAggrPerQueueMainDiscardTnCO ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-67 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 80
MIB tables for PM per queue ..............................................(PM MIB) ethAggrMainTable MIB field name Description Value Total Discard on Conforming Octets - counter 64 bits yellow (counter 64 bits) ..............................................1-68 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
This will delete also all history information. I ARG OpticIMCsgVar::AttrList • AttrList[0].instance[0] = interface ifIndex (ethernet type) • AttrList[0].oid = opticsIMETSMib:: ethAggrPerQueueCDRowStatus • AttrList[0].type = I TEGER • AttrList[0].val = RowStatus_destroy ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-71 Issue 1 March 2010 Use pursuant to applicable agreements...
& time by seconds since 1970 that the current StartTime counters collection have started Maintenance counter upload (per queue) GetTable I ARG OpticsIMCsgVar::CsgVar::OID: tableOid = OPTICSIM-ETHPM-MIB:: ethAggrPerQueueMaintTable ..............................................1-72 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 85
(yellow) frames ethAggrPerQueueHDTCO Counter64 (64 bits) umber of conforming (green) octets ethAggrPerQueueHDTnCO Counter64 (64 bits) umber of on conforming (yellow) octets ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-73 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 86
I TEGER Truth or False if this interval is suspected to be not correctly and fully collected during all interval time ..............................................1-74 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Contents Mirror interface definition 1-76 Inflow mirror port 1-77 Inflow mirror flag 1-78 Outflow mirror port 1-79 Outflow mirror flag 1-80 Service mirroring upload 1-81 ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-75 Issue 1 March 2010 Use pursuant to applicable agreements...
Before the change of mirror interface(nn MXOpticsExtETSMirroringIndex) make sure the AdminStatus of the interface in IfTable is Down. S T E P S ...................................................................................... 1-76 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Before the change of service mirroring index make sure the InflowMirror flag of the inflow in nn MXOpticsExtETSInflowMirrorTable is disabled. S T E P S ...................................................................................... 365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-77 Issue 1 March 2010 Use pursuant to applicable agreements...
1. The RowStatus of the cross-connection connected to specified inflow in opticsIMETSCrossConnectTable is active. 2. nn MXOpticsExtETSOuflowMirror for outflow connected to the cross-connection is disabled. S T E P S ...................................................................................... 1-78 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Before the change of service mirroing index make sure the OutflowMirror flag of the outflow in nn MXOpticsExtETSOutflowMirrorTable is disabled. S T E P S ...................................................................................... 365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-79 Issue 1 March 2010 Use pursuant to applicable agreements...
1. The RowStatus of the cross-connection connected to specified inflow in opticsIMETSCrossConnectTable is active. 2. nn MXOpticsExtETSInflowMirror for outflow connected to the cross-connection is disabled. S T E P S ...................................................................................... 1-80 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
AttrVal.val = Mirroring Index. OTAC(0) / TAC1(1) / TAC2(2) ........................................InFlows upload Uploading the inflows consists in getting the content. nnNMXOpticsExtETSInflowMirrorTable The sequence of operations is detailed in the next table: ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-81 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 94
AttrVal.oid = nn MXxMplsIf::nn MXOpticsExtETSOutflowMirrorPort – AttrVal.type = I TEGER – AttrVal.val = Mirror Port. TAC1 (1) / TAC2 (2) S T E P S ...................................................................................... 1-82 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
LAG key, the port is an attached LAG member. For LAG naming rules refer to Appendix B, “1+1 LAG naming rules” LAG naming rules..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-83 Issue 1 March 2010 Use pursuant to applicable agreements...
LACP frames. When this field is not zero and lacp is off it just means that port is setup to Be port of that LAG..............................................1-84 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 97
When LACP is Disabled alclnkaggAggPortActorOperState A string of 8 bits, corresponding to the Read-Only operational values of Actor_State On LACP disable mode, all bits are cleared ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-85 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 98
• 2: no • 3: notSignificant On LACP disable mode, only value 3 is supported alclnkaggAggPortLacpType LacpType Read-Only Port set with LACP protocol or not ..............................................1-86 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 99
In use only when LACP is enabled. LAGs with LACP on. Default value: 32784 (0x8010) alclnkaggAggActorSystemID ode MAC addres Read-Only In use only when LACP is enabled. Default value: 00-00-00-00-00-00 alclnkaggAggActorOperKey ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-87 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 100
String Description of the LAG Read-Only DisplayString SIZE (0..255) alclnkaggAggLacpType Defines whether Aggregator operates Read-Write LACP or ot. I TEGER • 1: lacpOff • 2: lacpOn alclnkaggAggAdminState ..............................................1-88 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 101
Default value is 0 - (first port). alclnkaggAggRowStatus This object is the RowStatus (locking flag) Read-Write for creating or deleting aggregator objects CreateAnGo, Active, or Destroy ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-89 Issue 1 March 2010 Use pursuant to applicable agreements...
AttrVal.val = 1-up In order to complete ports association to a LAG group, the group should be configured as well. S T E P S ...................................................................................... 1-90 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
I ARG OpticIMCsgVar::AttrVal • AttrVal.instance[0] = interface ifIndex • AttrVal.oid = alclnkaggAggTable:: alclnkaggAgg ame • AttrVal.type = STRI G AttrVal.val = ame of the aggregator ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-91 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 104
• AttrVal.instance[0] = interface ifIndex • AttrVal.oid = alclnkaggAggTable:: alclnkaggAggAdminState • AttrVal.type = I TEGER • AttrVal.val = enable(1) S T E P S ...................................................................................... 1-92 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
• AttrVal.instance[0] = interface ifIndex • AttrVal.oid = alclnkaggAggTable:: alclnkaggAggAdminState • AttrVal.type = I TEGER • AttrVal.val = disable(2) S T E P S ...................................................................................... 365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-93 Issue 1 March 2010 Use pursuant to applicable agreements...
AttrVal.val = The current administrative value of the Key for the Aggregator – or – AttrVal.oid = alcatelI D1LAGMIB:: alclnkaggAggPortState – AttrVal.type = I TEGER – AttrVal.val = configurable(2), attached(6) S T E P S ...................................................................................... 1-94 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
The support allows general management. The MIB objects for the support are: MIB field name Description Value opticsIMNERestartRequest (RW) Restart the card restart idle coldRestart warmRestart dbTruncate ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary 1-95 Issue 1 March 2010 Use pursuant to applicable agreements...
Truncate (clear) the database and do a cold restart Set reset object I ARG OpticsIMCsgVar::AttrList • AttrList[0].oid = tsdimSupportMib::opticsIM ERestartRequest.0 • AttrList[0].type = I TEGER • AttrList[0].val = the restart type (1-5) ..............................................1-96 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 112
Table A-1 Port to ifIndex mapping table (continued) Port ethernet ifIndex Port ethernet ifIndex Port ethernet ifIndex ifIndex ifIndex ifIndex 268436137 1369 268436825 268436145 1377 268436833 ..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 113
Interface Type 1…1023 (10 bits) Hard- coded decimal value Logical Interface 1…262143 (18 bits) Identifier Total: 32 bits 17…0 Data client purposes Interface type Logical Interface Identifier ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary Issue 1 March 2010 Use pursuant to applicable agreements...
Page 114
• 00 01 00 00 | 00 00 01 00 01 00 00 00 00 01 | LAG logical identifier • Index of LAG x = 1115947008 (0x42840000) + x ..............................................Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements...
Page 115
Committed Burst Size Committed Information Rate Class of Service ..............................................Ethernet Transport Bridging Ethernet Transport Service ..............................................Frame Check Sequence ..............................................Gigabit Ethernet Generic Frame Procedure ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary GL-1 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 116
GFP SONET Internet Protocol Integrated Service Adapter ..............................................Local Area etwork LAPS Link Access Procedure over SDH ..............................................Medium Attachment Unit Management Information Base ..............................................GL-2 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...
Page 117
Optical etworks Division ..............................................Peak Burst Size Peak Information Rate ..............................................Quality of Service ..............................................Synchronous Digital Hierarchy SNMP Simple etwork Management Protocol ..............................................VLA Identifier ..............................................365-374-201R11.1.1 Alcatel-Lucent – Proprietary GL-3 Issue 1 March 2010 Use pursuant to applicable agreements...
Page 118
Glossary ..............................................VLAN Virtual LA ..............................................GL-4 Alcatel-Lucent – Proprietary 365-374-201R11.1.1 Use pursuant to applicable agreements Issue 1 March 2010...