Bridge-Priority - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

bridge-priority

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1424
®
OS for EX Series Ethernet Switches, Release 10.3
bridge-priority priority;
[edit protocols mstp],
[edit protocols mstp msti msti-id],
[edit protocols rstp],
[edit protocols stp],
[edit protocols vstp vlan vlan-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Configure the bridge priority. The bridge priority determines which bridge is elected as
the root bridge. If two bridges have the same path cost to the root bridge, the bridge
priority determines which bridge becomes the designated bridge for a LAN segment.
32,768
—Bridge priority. It can be set only in increments of 4096.
priority
Range: 0 through 61,440
Default: 32,768
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1644
show spanning-tree interface on page 1653
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1541
Understanding MSTP for EX Series Switches on page 1521
Understanding VSTP for EX Series Switches on page 1525
Copyright © 2010, Juniper Networks, Inc.