Novell NETWARE 6-DOCUMENTATION Manual page 3142

Response File Source Information is missing.
Source:
Explanation:
Possible Cause:
Action:
The following driver instance failed to load: string.
Source:
Action:
Action:
Volume name is out of disk space. File filename cannot be copied.
Source:
Action:
module name: Unable to allocate memory.
Source:
Possible Cause:
Action:
module name: Unable to create process.
Source:
Possible Cause:
Action:
HDETECT.NLM
Novell provides a response file. However, you can specify for the installation
software to use your own custom response file and direct the installation
program to use it (by using the /rf=path parameter). When using this
parameter, you specify the complete path.
You customized a response file and installation is looking for it in an
incorrectly specified directory.
Make sure that the response file exists in a specified directory and that you
have correctly entered the path.
HDETECT.NLM
Make sure that the selected driver corresponds with the hardware in your
server.
Verify that the parameters are set correctly for the hardware.
HDETECT.NLM
Verify that the server has enough disk space (500MB NetWare partition) and
that the hard disk is functional.
HDETECT.NLM
The software cannot get memory to create structures. The server does not have
enough memory or has used up its available memory.
If the server does not have 64MB of RAM, add memory.
HDETECT.NLM
The server is unable to create a process that allows HDETECT.NLM to run.
Exit installation and begin again.
HDETECT Messages 191