Novell NETWARE 6-DOCUMENTATION Manual page 3596

76: The system could not change the file attributes of file name. The mode was
number.
Source:
Possible Cause:
Action:
79: The procedure EditText failed because the default text was longer than the
maximum length allowed.
Source:
Possible Cause:
Action:
82: The paste buffer is empty.
Source:
Explanation:
83: The text buffer is full.
Source:
Possible Cause:
Action:
85: The marked block is too big for the available memory.
Source:
Possible Cause:
Action:
utility name in message prefix
An internal system error probably has occurred.
Restart the workstation. If the problem persists, contact a Novell support
provider.
utility name in message prefix
This is probably an internal program logic error, though it could be caused by
message expansion during translation.
Contact a Novell support provider.
utility name in message prefix
This is a status message indicating that user tried to retrieve a data block from
the paste buffer, but nothing was in the buffer.
utility name in message prefix
The text block the user marked is too large to hold in the text buffer.
Mark and process several smaller text blocks instead of trying to process a
single large block.
utility name in message prefix
The text block the user marked is too large to hold in the workstation's
memory.
Mark and process several smaller text blocks instead of trying to process a
single large block.
TEXTUTIL-utility_name 645