Novell NETWARE 6-DOCUMENTATION Manual page 3578

SPXS Messages
SPX-X-5: There is insufficient memory for allocation.
Source:
Explanation:
Possible Cause:
Action:
SPX-X-6: There insufficient memory for allocation.
Source:
Explanation:
Possible Cause:
Action:
SPX-X-7: SPXII cannot be configured.
Source:
Explanation:
The following includes messages from SPXS.NLM.
SPXS.NLM
SPXII was unable to allocate the requested amount of memory for the Protocol
ID table or the board registration table.
The server does not have enough available memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SPXS.NLM
SPXII was unable to allocate the requested amount of memory for the Protocol
ID table or the board registration table.
The server does not have enough available memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SPXS.NLM
An attempt was made to configure SPXII, but SPXII parameters cannot be
configured.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
SPXS Messages 627