Novell NETWARE 6-DOCUMENTATION Manual page 2663

Parameter
SLP Broadcast = value
SLP MTU Size = value
SLP Rediscover Inactive Directory
Agents = value
SLP Retry Count = value
SLP Scope List = value
SLP SA Default Lifetime = value
Use to
Use broadcast packets instead of multicast packets.
Supported values: OFF, ON
Default: OFF
This parameter can be set in the STARTUP.NCF file.
Specify an integer describing the maximum transfer unit size.
Supported values: 0 to 4294967255
Default: 1472
This parameter can be set in the STARTUP.NCF file.
Specify the minimum time period in seconds that SLP will wait to
issue service requests to rediscover inactive Directory Agents.
Supported values: 0 to 4294967255
Default: 60
This parameter can be set in the STARTUP.NCF file.
Specify an integer value describing the maximum number of
retries.
Supported values: 0 to 128
Default: 3
This parameter can be set in the STARTUP.NCF file.
Specify a comma-delimited scope policy list.
Max Length: 1023
Default: 1023
This parameter can be set in the STARTUP.NCF file.
Specify an integer value describing the default lifetime in seconds
of service registers.
Supported values: 0 to 4294967255
Default: 900
This parameter can be set in the STARTUP.NCF file.
Utilities 225