Novell NETWARE 6-DOCUMENTATION Manual page 3527

SERVER-X-2973: Warning: extra input ignored (value).
Source:
Explanation:
Action:
SERVER-X-2994: Unable to allocate memory for new language name.
Source:
Possible Cause:
Action:
SERVER-X-2995: Unable to allocate memory for new language.
Source:
Possible Cause:
Action:
SERVER-X-3044: Unable to find load file filename.
Explanation:
SERVER-X-3085: Invalid offset from Universal Time Coordinate.
Source:
Possible Cause:
Action:
576 System Messages
SERVER.EXE
Extra input was included when the SET command was executed.
Make sure the SET parameter was executed with the correct values. Re-
execute the SET command if necessary.
SERVER.EXE
The operating system was unable to allocate memory for a new language name
because it is out of memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SERVER.EXE
The operating system was unable to allocate memory for a new language
because it is out of memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
See message "SERVER-X-1948: Unable to find load file filename." on page
567.
SERVER.EXE
You did not enter an offset from the Universal Time Coordinate or you
specified an offset that is not valid (for example, it might be too big or too
small).
Specify a valid offset from the Universal Time Coordinate.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.