Novell NETWARE 6-DOCUMENTATION Manual page 3469

SBCON-X-23: No services are available.
Source:
Possible Cause:
Action:
SBCON-X-27: The specified user does not exist.
Source:
Possible Cause:
Action:
SBCON-X-28: Error connecting to Target Service
Source:
Possible Cause:
Action:
SBCON-X-30: Error opening the file filename
Source:
Possible Cause:
Action:
SBCON-X-32: The specified key function is not implemented.
Source:
Possible Cause:
Action:
518 System Messages
SBCON.NLM
The workstation TSAs have not been registered to the TSAProxy.
1. Make sure the workstation TSA is running. 2. Set the preferred server
through the TSA interface and submit the registration. 3. Retry the operation.
If the problem persists, contact your Novell support provider.
SBCON.NLM
The user name entered is not valid.
Type the appropriate user name and context. If full context must be used,
precede the name with a period (.), for example, .admin.novell. Try again.
SBCON.NLM
With DOS TSA, only one connection is allowed. This error may occur if
several users are trying to connect to the DOS TSA at the same time.
Disconnect the first connection and retry the operation.
SBCON.NLM
Either the directory does not exist for this file, or this file is Read Only.
If the directory does not exist, create the directory. If the file is Read Only,
remove the Read Only attributes.
SBCON.NLM
This function is not yet implemented.
Contact your Novell support provider for the new modules when they become
available.