Novell NETWARE 6-DOCUMENTATION Manual page 3386

NWCONFIG-X-549: Warning: An attempt to open configuration file AUTOEXEC.NCF
failed. Error code: number.
You may still configure PSMs, but later you will have to manually add the LOAD
commands to the configuration file if you want the driver LOAD operations to remain
after the server reboots.
Source:
Explanation:
Action:
NWCONFIG-X-550: No Platform Support Module files (*.PSM) can be found.
Source:
Explanation:
Action:
NWCONFIG-X-551: No PSM driver files (*.PSM) were found at this path.
Source:
Explanation:
Action:
NWCONFIG-X-553: Abend: ScanTrusteeRights reported too many trustees.
Source:
Explanation:
Action:
NWCONFIG.NLM
The AUTOEXEC.NCF file could not be opened. It might be corrupted or it
might have been accidentally deleted.
To view the AUTOEXEC.NCF file (or to create a new one if necessary) load
NWCONFIG and select NCF File Options > Edit AUTOEXEC.NCF File.
NWCONFIG.NLM
Platform support modules required for multiprocessing could not be found in
the Drivers subdirectory of the NetWare boot directory.
If the files are located somewhere else, move them to the Drivers subdirectory
under the NetWare boot directory. If the files cannot be found, copy them from
the NetWare CD.
NWCONFIG.NLM
The path you specified does not contain .PSM files.
PSM files are usually stored in the Drivers subdirectory of the NetWare boot
directory. If you cannot find them, copy them from the NetWare CD.
NWCONFIG.NLM
A request was made to the NetWare operating system for a certain amount of
information, but more information was returned than was requested. This
indicates that the system is not stable.
Contact a Novell support provider.
NWCONFIG Messages 435