Novell NETWARE 6-DOCUMENTATION Manual page 3484

SBCON-X-522: An error occurred in the restore job.
Source:
Possible Cause:
Action:
SBCON-X-525: No media is present.
Source:
Possible Cause:
Action:
SBCON-X-528: Could not execute the job: job_name
Source:
Possible Cause:
Action:
Action:
Action:
Action:
SBCON-X-533: Could not load the engine: engine_name
Source:
Possible Cause:
Action:
SBCON-X-539: An error occurred during session file creation.
Source:
Possible Cause:
Action:
Action:
SBCON.NLM
The restore job could not be completed.
Check the activity log file in Sys:system\tsa\log\activity.log for the error.
SBCON.NLM
Some of the slots are empty in the Autoloader.
This message is for information only.
SBCON.NLM
The submitted job could not be executed.
Check that the correct TSA is loaded.
For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.
Check that the device is on, contains a media, and the device drivers are
loaded.
Load SMSDI.NLM after loading the device drivers.
SBCON.NLM
The SME.NLM module must be present in the system path.
Make sure the SME.NLM is present in the SYS:SYSTEM directory.
SBCON.NLM
The submitted job could not be executed.
Check that the correct TSA is loaded.
For workstation TSAs, check that the TSA has registered to the correct
TSAProxy.
SBCON Messages 533