Novell NETWARE 6-DOCUMENTATION Manual page 3334

NWCONFIG-X-209: The selected disk is no longer valid.
Source:
Explanation:
Action:
NWCONFIG-X-210: This volume is not currently mounted.
Source:
Explanation:
Action:
NWCONFIG-X-211: Volume name could not be mounted. Refer to the system console
screen for an error report.
Source:
Explanation:
Action:
NWCONFIG-X-212: The volume is already mounted.
Source:
Explanation:
Action:
NWCONFIG-X-213: HotFix could not be installed on the drive. Error code: code.
Source:
Explanation:
Action:
NWCONFIG.NLM
The installation program can no longer access the disk drive.
See Disk Errors in the
NWCONFIG.NLM
The program tried to access a volume that was not mounted.
Mount the volume and try again. You might have to mount the volume by
entering mount volume_name at the system console.
NWCONFIG.NLM
NWCONFIG made a request to the operating system to mount the volume, but
the request failed for some reason.
See the console screen error message.
NWCONFIG.NLM
The user tried to mount a volume that is already mounted.
None. This message is for information only.
NWCONFIG.NLM
NWCONFIG made a request to the operating system to create Hot Fix on the
drive, but the request failed.
For information on the specific error code, search the
documentation (http://www.novell.com/documentation/lg/nwec/docui/
index.htm).
Server Operating System Administration Guide.
Error Codes online
NWCONFIG Messages 383