Novell NETWARE 6-DOCUMENTATION Manual page 3432

PSERVER-X-97: Account on NetWare server name was disabled because of intruder
detection.
Source:
Possible Cause:
Action:
PSERVER-X-98: The supervisor has limited the number of concurrent connections
the print server can have on NetWare server name.
Source:
Possible Cause:
Action:
PSERVER-X-99: The supervisor has disabled the print server's account on NetWare
server name.
Source:
Explanation:
Action:
To delete the print server, run PCONSOLE, select Print Server
Information, and delete the print server from the list. Then re-create the
print server.
To delete accounting, run NetWare Administrator and select Accounting,
then select Accounting Servers. Delete all servers from the list. Press
<Esc> and answer Yes to the prompt to remove accounting. Then reinstall
accounting.
PSERVER.NLM
The login property for intruder detection is set. NetWare does not have a
program that sets this property for print servers. Either the bindery is
corrupted, or you have used a third-party program to set this property.
Complete one of the following:
If you have not used a third-party utility to set this property, run
DSREPAIR on the bindery server.
If you have a third-party program that sets this property, use it to remove
the station restriction.
PSERVER.NLM
The print server reached the allowed limit for concurrent connections to the
file server.
Wait until another user logs out, or free a connection using MONITOR.
PSERVER.NLM
The print server no longer has an account on the server.
If you have appropriate rights, establish a new account for the print server.
PSERVER Messages 481