Novell NETWARE 6-DOCUMENTATION Manual page 2701

Using TECHWALK
TIME
Purpose
Syntax
Using TIME
Parameter
(no parameter)
console_NLM_name
TECHWALK saves the configuration information for INETCFG (or the
specified NLM program) to a file named SYS:ETC\TECHWALK.OUT. All
enabled items and summary lists are recorded.
You might prefer to exit INETCFG (or the specified NLM program) before
you run TECHWALK. Running TECHWALK takes from 5 to 60 minutes,
depending on your configuration and the network traffic, and dedicates your
machine to the process during that period.
Use at the server console to display
Date and time kept by the NetWare
Daylight saving time status
Time synchronization information
TIME
When you execute TIME, information similar to the following appears on the
console screen.
NOTE:
The output is formatted according to your locale configuration.
Use to
Record configuration information for
the NetWare MultiProtocol Router 3.1
INETCFG NLM program.
TM
Record configuration information for
the specified NLM program.
®
server's clock
Utilities 263