Novell NETWARE 6-DOCUMENTATION Manual page 2661

Parameter
Allow Change to Client Rights = value Control whether a job server can assume the rights of a client for
Allow LIP = value
Novell Storage Service Parameters
Service Location Protocol Parameters
Use to
NCP packet signatures.
Supported values: ON, OFF
Default: ON
Note: Some job servers and third-party applications can't
function without changing to client rights.
Using OFF might prevent some job servers from getting access
to the files they need, but it prevents the forging of a packet
through the job or print server.
You can set this parameter in the STARTUP.NCF file.
Set Large Internet Packet (LIP) support.
Supported values: ON, OFF
Default: ON
You can set this parameter in the STARTUP.NCF file.
For Novell Storage Service set parameters, see
page 126, "NSS DOS FAT Commands" on page
SALVAGE Commands" on page
page 128, and "Other NSS Commands" on page
The service location protocol parameters define how SLP locates and
distributes information about services that are available on the network.
For descriptions of service location protocol parameters, see
224.
"NSS Load Commands" on
127,
127, "NSS Buffer Cache Commands" on
128.
"PURGE and
Table 14 on page
Utilities 223