Novell NETWARE 6-DOCUMENTATION Manual page 3148

IDEATA.HAM Messages
IDEATA.HAM–001: This driver is not compatible with the detected bus type
Source:
Possible Cause:
Action:
IDEATA.HAM–003: Insufficient memory to register the object
Source:
Possible Cause:
Action:
IDEATA.HAM–004: Could not load reentrantly
Source:
Possible Cause:
Action:
The following includes messages from the IDEATA.HAM.
IDEATA.HAM
The driver did not load because the hardware bus type of the server is
incompatible with the bus type the driver was designed to support. The
IDEATA.HAM driver supports IDE/ATA controller cards designed to work on
ISA/EISA machines.
Use a controller card and compatible .ham driver appropriate for the server's
I/O bus.
IDEATA.HAM
The driver failed to load because there was insufficient memory for the .ham
driver to create the objects necessary to support the controller and attached
devices.
Unload any unnecessary NLM programs and try to reload the driver.
IDEATA.HAM
The attempt to load the driver reentrantly failed because the driver was unable
to complete reentrant module registration with the NWPA.
Unload any unnecessary .cdm and .ham drivers and try to reload the driver.
IDEATA.HAM Messages 197