Novell NETWARE 6-DOCUMENTATION Manual page 3471

SBCON-X-58: Error inserting into list.
Source:
Possible Cause:
Action:
SBCON-X-60: No TSAs are available on the selected server.
Source:
Possible Cause:
Action:
SBCON-X-61: You should select a data set to back up first.
Source:
Possible Cause:
Action:
SBCON-X-74: Are you sure you want to delete all marked sessions?
Source:
Possible Cause:
Action:
SBCON-X-75: Are you sure you want to delete this session?
Source:
Possible Cause:
Action:
SBCON-X-79: An undefined error has occurred: error_number.
Source:
Possible Cause:
Action:
520 System Messages
SBCON.NLM
There was an error scanning the data set.
Try connecting to the TSA again, then select the data set.
SBCON.NLM
No TSAs have been loaded.
Load the appropriate TSA (TSA600.NLM, TSANDS.NLM,
TSADOSP.NLM, or GWTSA.NLM). Retry the operation. If the problem
persists, contact your Novell support provider.
SBCON.NLM
No data sets have been selected when you tried to submit a job.
Before you submit a job, select at least one data set to back up, then submit the
job.
SBCON.NLM
You are trying to delete all the sessions marked using <F5>.
Select Yes if you want to delete all the selected session files; otherwise, select
No.
SBCON.NLM
You are trying to delete a session file.
Select Yes to delete the file; select No if you do not want to delete the file.
SBCON.NLM
An internal error has occurred.
Note the error number and the conditions for simulating the error. Contact
your Novell support provider.