Novell NETWARE 6-DOCUMENTATION Manual page 3308

NWCONFIG-X-59: A system volume could not be created.
Source:
Explanation:
Action:
NWCONFIG-X-60: Volume name was not found in volume list.
Source:
Explanation:
Action:
NWCONFIG-X-61: An invalid pointer to a segment of existing volume name was
encountered.
Source:
Explanation:
Action:
NWCONFIG-X-62: The program could not create a new menu or form.
Source:
Explanation:
Action:
NWCONFIG-X-64: An attempt to display information failed; error code: code. Either
memory could not be allocated or the text does not fit on the screen.
Source:
Explanation:
Action:
NWCONFIG.NLM
NWCONFIG could not write to the disk. The proper disk driver might not be
loaded, the cabling might be not correct, or the drive parameters might be set
incorrectly.
See Disk Errors in the
NWCONFIG.NLM
NWCONFIG could not read the disk. The proper disk driver might not be
loaded, the cabling might be not correct, or the drive parameters might be set
incorrectly.
See Disk Errors in the
NWCONFIG.NLM
An internal system error has occurred.
Try again. If the problem persists, contact a Novell support provider.
NWCONFIG.NLM
This error is probably caused by insufficient memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
An internal system error has occurred. Either the server does not have enough
memory, or the text does not fit on the screen.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Server Operating System Administration
Server Operating System Administration
Guide..
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide. For
NWCONFIG Messages 357