Novell NETWARE 6-DOCUMENTATION Manual page 3010

Possible Cause:
Action:
DSI-X-44: DSI's attempt to add a new partition timed out.
Source:
Explanation:
Possible Cause:
Action:
Possible Cause:
Action:
DSI-X-45: An internal error has occurred. DSI cannot get the volume ID; you are not
logged in to the Directory.
Source:
Possible Cause:
Action:
DSI-X-46: DSI cannot find the local server context. Error description: description.
Source:
Explanation:
Possible Cause:
Action:
Possible Cause:
Action:
The object corresponding to the administrator that you logged in as does not
have Create rights in the context.
Make sure you have the Supervisor right in the context (or to the nearest parent
to the context) where you are installing. If this is not the case, give yourself
the Supervisor right in the context and retry the installation. If the problem
persists, contact a Novell support provider.
DSI.NLM
An attempt to create a new partition for the new context failed. The new
partition should have been created on the server containing the master
partition for the nearest existing parent context.
The server containing the master might have suddenly gone down.
Make sure that all servers above this one in the tree that contain master
partitions are operating.
Traffic on the network might be excessive.
Minimize external network traffic between this server and other servers in the
same Directory tree as much as possible; then, retry the installation. If the
problem persists, contact a Novell support provider.
DSI.NLM
An internal system error has occurred.
Try the operation again. If the problem persists, contact a Novell support
provider.
DSI.NLM
An attempt to get information from the Directory database failed.
File I/O errors might have occurred.
See Resolving File I/O Errors
Guide.
An internal system error has occurred.
Try the operation again. If the problem persists, contact a Novell support
provider.
in the Traditional File Services Administration
59
DSI Messages